Features
- Built-in type identification automatically
identifies these devices to the control panel.
- Internal circuitry and relay powered directly by two-wire
SLC loop. The FCM-1(A) module requires power
(for horns, strobes, etc.), or audio (for speakers).
- Integral LED blinks green each time a communication is
received from the control panel and turns on in steady red when activated.
- LED blink may be deselected globally (affects all devices).
- High noise immunity (EMF/RFI).
- The FCM-1(A) may be used to switch 24-volt NAC power,
audio (up to 70.7 Vrms).
- Wide viewing angle of LED.
- SEMS screws with clamping plates for wiring ease.
- Direct-dial entry of address 01 159 for FlashScan loops,
01 - 99 for CLIP mode loops.
- Speaker, and audible/visual applications may be wired for
Class B or A (Style Y or Z).
- Normal operating voltage: 15 to 32 VDC.
- Maximum current draw: 6.5 mA (LED on).
- Average operating current: 350 μA direct poll, 375 μA group poll with LED
flashing, 485 μA Max. (LED flashing, NAC shorted.)
- Maximum NAC Line Loss: 4 VDC.
- External supply voltage (between Terminals T10 and T11) :
Maximum (NAC): Regulated 24 VDC;
Maximum (Speakers): 70.7 V RMS, 50W.
- Drain on external supply: 1.7 mA maximum using 24 VDC supply; 2.2 mA Maximum using 80 VRMS supply.
- Max NAC Current Ratings: For class B wiring system, the current rating
is 3A; For class A wiring system, the current rat-ing is 2A.
- Temperature range: 32°F to 120°F (0°C to 49°C).
- Humidity range: 10% to 93% non-condensing.
- Dimensions: 4.5" (114.3 mm) high x 4" (101.6 mm) wide x 1.25"
(31.75 mm) deep. Mounts to a 4" (101.6 mm) square x 2.125"
(53.975 mm) deep box.
- Accessories: SMB500 Electrical Box; CB500 Barrier
